MANAGEMENT OF PRODUCTION RISKS IN TECHNOLOGICAL SYSTEMS OF WAGON REPAIR ENTERPRISES

Authors

DOI:

https://doi.org/10.32703/2617-9040-2022-39-3

Keywords:

of wagon repair enterprises, production logistics, risk management system, state of the production system.

Abstract

At the moment, the modernization of the wagon repair complex is an urgent scientific and technical task on the railway transport of Ukraine. Wagon repair companies are characterized by insufficient pace of development over time. This is expressed in significant physical and moral depreciation of fixed assets of enterprises, large material losses in the process of repairing wagons, high cost of repair, low mechanization and automation of basic and auxiliary production processes, etc. Bearing in mind that railway transport is a critical component of the transport complex of Ukraine, the creation of advanced production systems based on the principles of production logistics is considered a necessary step for further development of the industry.
The presented article analyzes the current state of wagon repair companies. The conclusion is made about the need for risk analysis in production processes given the difficult operating conditions. An example of an algorithm for implementing a risk management system and its main components is given. The analysis of the main methods of influencing the risk in the production system is carried out. Practical solutions for obtaining quantitative indicators of risk assessment in the production processes of wagon repair with the help of Markov analysis are proposed. In general, the risk management system will significantly reduce material losses when repairing wagon.

References

REFERENCES

Bilal, M. (2014). Risk Analysis in Engineering and Economics. A Chap-man & Hall Book. 640p. [in English]

Systemy upravlinnya yakistyu. Vymohy [Quality management systems. Requirements] (2015). DSTU ISO 9001:2015 from 01 July 2016. Lviv: DP NDI «Systema» [in Ukrainian]

Menedzhment ryzykiv. Pryntsypy ta nastanovy [Risk management. Principles and guidelines] (2018). DSTU ISO 31000:2018 from 01 January 2019. Kyiv : DP «UkrNDNTS» [in Ukrainian]

Keruvannya ryzykom. Metody zahalʹnoho otsinyuvannya ryzyku [Risk management. Methods of general risk assessment] (2013). DSTU IEC/ISO 31000:2018 from 01 July 2014. Lviv: DP NDI «Systema» [in Ukrainian]

Sviderska, А. (2014). Ponyattya ta klasyfikatsiya ryzykiv u zovnishnʹoekonomichniy diyalʹnosti pidpryyemstva [The concept and classification of risks in foreign economic activities of an enterprise]. Halytsʹkyy ekonomichnyy visnyk - Galician economic journal (V. 46. № 3). (pp. 113-121) Ternopil : The Ternopil Ivan Puluj National Technical University [in Ukrainian]

Baldji, M.D. (2015). Ekonomichnyy ryzyk ta metody yoho vymiryuvannya [Economic risk and methods of its measurement] Kharkiv : Promart [in Ukrainian]

Kucherenko, V.R., Karpov, V.A., & Karpov, A.V. (2011). Ekonomichnyy ryzyk ta metody yoho vymiryuvannya [Economic risk and methods of its measurement] Odessa: ODUVS [in Ukrainian]

Posokhov, I.M. (2015). Upravlinnya ryzykamy u pidpryyemnytstvi [Enterprise Risk Management] Kharkiv: NTU "KhPI [in Ukrainian]

Vyshnevska, V., & Nikolaiev, I. (2018). Vplyv ryzykiv na pokaznyky efektyvnosti diyalʹnosti promyslovykh pidpryyemstv [Risk Influence on the Indicators of Performance of Industrial Enterprises] Naukovi pratsi Kirovohradsʹkoho natsionalʹnoho tekhnichnoho universytetu. Ekonomichni nauky – Scientific works of Kirovograd National Technical University. Economic sciences. (V.33) (pp. 211–218) Kirovograd : KNTU [in Ukrainian]

Ivchenko, I.Y. (2014). Ekonomichni ryzyky [Economic risks] Kyiv : Center for Educational Literature [in Ukrainian]

Starostina, A.A., & Kravchenko, V.A. (2015). Ryzyk-menedzhment : teoriya ta praktyk [Risk management: theory and practice] Kyiv : IPC "Polytechnic Publishing House" [in Ukrainian]

Desheng, W., David L. O., & Dolgui, A., (2015). Decision making in enterprise risk management: A review and introduction to special issue. Vol. 57, Part A, December 2015, Pages 1-4. [in English]

Saleh, A. D., Fakhariya, I., Sainab, F., Imad, A. (2021). Integration of failure mode, effects, and criticality analysis with multi-criteria decision-making in engineering applications: Part I. Manufacturing industry Engineering Failure Analysis,Vol. 122, April 2021, 105264. Retrieved from https://doi.org/10.1016/j.engfailanal.2021.105264 [in English]

Hang, Z. T., Lopes, A., Brintrup, G. A., & Parlikad, A. K. (2022). A hybrid-learning decomposition algorithm for competing risk identification within fleets of complex engineering systems. Reliability Engineering & System Safety. Vol. 217, January 2022, 107992. Retrieved from https://doi.org/10.1016/j.ress.2021.107992 [in English]

Armin, T., Neetesh, S., Gardoni, P. (2022). Uncertainty propagation in risk and resilience analysis of hierarchical systems. Reliability Engineering & System Safety. Vol. 219, March 2022, 108208 Retrieved from https://doi.org/10.1016/j.ress.2021.108208 [in English]

Caroline, A. J., Roger, F., & Seth, D. G. (2021). Feasibility study of PRA for critical infrastructure risk analysis. Reliability Engineering & System Safety. Vol. 212, August 2021, 107643 Retrieved from https://doi.org/10.1016/j.ress.2021.107643 [in English]

Gorbunov, V. (2021). Risk Analysis in Engineering Projects : Risk Management / M. Sarfraz, L. Ivascu, Intech Open, 2021. DOI: 10.5772/intechopen.98197. Retrieved from https://www.intechopen.com/chapters/77337 [in English]

Pinto, C. A., Garvey, P. R. (2012). Advanced Risk Analysis in Engineering Enterprise Systems (1st ed.). CRC Press. 2012. 464р. Retrieved from https://doi.org/10.1201/b13100 [in English]

Emovon, I., Norman, R. (2020). Risk analysis of engineering systems for sustainable industrial development using the Taguchi approach. Journal of Quality in Maintenance Engineering, Vol. 26 No. 4, 2020. pp. 611-624. Retrieved from https://doi.org/10.1108/JQME-06-2019-0060 [in English]

Rykov, V., Ivanova, N. & Farhadov, M. (2022). On principles of risk analysis with a practical example // RT&A, Special Issue № 3 (66) Vol. 17, January 2022, р.р.38-41. [in English]

Fang, C., Marle, F., Xie, M. (2017). Applying Importance Measures to Risk Analysis in Engineering Project Using a Risk Network Model. IEEE Systems Journal, Vol. 11, no. 3, pp. 1548-1556, Sept. 2017, Retrieved from doi:10.1109/JSYST.2016.2536701. [in English]

Voloshyn, D.I., Voloshynа, L.V. (2021). Pidvyshchennya dynamichnoyi stiykosti pidpryyemstv transportnoyi infrastruktury [Іncreasing the dynamic resilience of transport]. III Mizhnarodna naukovo-praktychna morsʹka konferentsiya kafedry SEU i TE Odesʹkoho natsionalʹnoho morsʹkoho universytetu – III International Scientific and Practical Marine Conference of the Department of SEU and TE Odessa National Marine University. April 2021. Retrieved from http://2021.depas.od.ua/, https://drive.google.com/file/d/1O7Zwwr0HRnmHiY1MlnCFs-zaZxxMc64p/view. [in Ukrainian]

Voloshyn, D.I.(2015). Do pytannya pidvyshchennya nadiynosti roboty vyrobnychykh pidrozdiliv pidpryyemstv z remontu vahoniv [Prior to nutrition, the need for robots has been adjusted for robotic workers of enterprises for the repair of wagons] Zbirnyk naukovykh pratsʹ UkrDUZT – Collected scientific works of USURT. (V. 157) (Pp. 128-131). Kharkiv : UkrSURT. [in Ukrainian]

Published

2022-06-27

How to Cite

Voloshyn, D., & Voloshyna, L. (2022). MANAGEMENT OF PRODUCTION RISKS IN TECHNOLOGICAL SYSTEMS OF WAGON REPAIR ENTERPRISES. Transport Systems and Technologies, (39), 22–29. https://doi.org/10.32703/2617-9040-2022-39-3

Issue

Section

Technics and techology